Ceramist

Search: Ceramist Search

CLOSE

Article

September 30, 2024

Influence of the Binder properties on Silicon Anode for Solid-State Batteries

Heetae Tak, Yuna Ko, Sungbin Oh, et al.

Ceramist. 2024;27(3):255-261.

Silicon (Si) has been considered as one of the most promising anode materials because of its high theoretical capacity of 4200 mAh g−1. However, the huge volume change and side...

Article

September 30, 2024

A Comparative Study on the Performance of Proton Ceramic Electrolysis Cells under Various Gas Conditions

Junho Jo, Dong Wan Jin, Hyung-Tae Lim

Ceramist. 2024;27(3):262-271.

This study investigated the performance of proton ceramic electrolysis cells (PCECs) under various gas conditions. PCECs consisting of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (BZCYYb1711) proton-conducting electrolyte, PrBa0.5Sr0.5Co1.5Fe0.5O6 – BZCYYb1711 composite air...

Article

September 30, 2024

Ruddlesden-Popper Perovskite Materials for Solid Oxide Fuel Cell Cathode: A Review

Phil Joo Chun, Won Bin Lim, Yoonseok Choi

Ceramist. 2024;27(3):272-290.

This review paper summarizes the recent findings on Ruddlesden-Popper (RP) phase materials for solid oxide fuel cell (SOFC) cathodes. These materials, known for their unique layered structure, show excellent performance...

Article

September 30, 2024

Recent research trends in layered perovskite-type air electrodes for reversible protonic ceramic cells

Hyeongsik Shin, Jiwon Yun, Boseok Seong, et al.

Ceramist. 2024;27(3):291-308.

systems at intermediate temperatures (400-600oC) due to their remarkable capability for reversible operation in both hydrogen production and electricity generation. To successfully implement this system, intensive research is mainly focused...

Article

September 30, 2024

Materials and Device Techniques for Electronic Skins with Intrinsic Stretchability

Ja Hoon Koo

Ceramist. 2024;27(3):309-322.

Electronic skin (e-skin) refers to the electronic devices that mimic the functionalities of human skin, such as their physical attributes and capabilities of sensing diverse stimuli including but not limited...

Article

September 30, 2024

Magnetic properties of exchange-coupled permanent magnets based on barium hexaferrite and cobalt ferrite nanocomposites

Sang-il Yoon, Hyunseung Kim, Jihun Choi, et al.

Ceramist. 2024;27(3):323-334.

The strategy of blending hard and soft magnetic materials to synthesize nanocomposites offers new possibilities for magnetic materials. We focus on synthesizing and optimizing BaFe12O19-CoFe2O4 nanocomposites using a co-precipitation method...

Article

September 30, 2024

Flexible Thermoelectric and Piezoelectric Hybrid Energy harvester by Adopting a Multifunctional Cellulose-based Composite Film

Bitna Bae, Cheol Min Kim, Changyeon Baek, et al.

Ceramist. 2024;27(3):335-346.

Thermoelectric (TE) and piezoelectric (PE) energy harvesting are the most advantageous conversion mechanisms for converting energy generated by the human body into electrical energy, respectively. However, the development of a...

Article

September 30, 2024

Effects of Ni cation ratio and sintering temperature on microstructure and electrical properties of NiMnCoO₄-based ceramics

Min Sung Park, Hwang Je Mun, Yubin Kang, et al.

Ceramist. 2024;27(3):347-358.

Negative temperature coefficient (NTC) thermistors as temperature sensors play an important role in various electrical/electronic devices and are widely applied in the fields such as, automotive sensor modules, home appliances...

Article

September 30, 2024

Sintering behavior of alumina by microwave hybrid sintering

Khalid Muhammad Waqas, Bin Lee

Ceramist. 2024;27(3):359-370.

Microwave sintering is considered an ideal sintering process due to its rapid heating rate, low energy consumption, and uniform temperature distribution between the interior and surface. However, the difficulty...

Current Issue: Volume 27(3); Sep 2024

Influence of the Binder properties on Silicon Anode for Solid-State Batteries Heetae Tak, Yuna Ko, Sungbin Oh, et al. Ceramist. 2024;27(3):255-261. Article September 30, 2024 PDF	A Comparative Study on the Performance of Proton Ceramic Electrolysis Cells under Various Gas Conditions Junho Jo, Dong Wan Jin, Hyung-Tae Lim Ceramist. 2024;27(3):262-271. Article September 30, 2024 PDF
Ruddlesden-Popper Perovskite Materials for Solid Oxide Fuel Cell Cathode: A Review Phil Joo Chun, Won Bin Lim, Yoonseok Choi Ceramist. 2024;27(3):272-290. Article September 30, 2024 PDF	Recent research trends in layered perovskite-type air electrodes for reversible protonic ceramic cells Hyeongsik Shin, Jiwon Yun, Boseok Seong, et al. Ceramist. 2024;27(3):291-308. Article September 30, 2024 PDF
Materials and Device Techniques for Electronic Skins with Intrinsic Stretchability Ja Hoon Koo Ceramist. 2024;27(3):309-322. Article September 30, 2024 PDF	Magnetic properties of exchange-coupled permanent magnets based on barium hexaferrite and cobalt ferrite nanocomposites Sang-il Yoon, Hyunseung Kim, Jihun Choi, et al. Ceramist. 2024;27(3):323-334. Article September 30, 2024 PDF
Flexible Thermoelectric and Piezoelectric Hybrid Energy harvester by Adopting a Multifunctional Cellulose-based Composite Film Bitna Bae, Cheol Min Kim, Changyeon Baek, et al. Ceramist. 2024;27(3):335-346. Article September 30, 2024 PDF	Effects of Ni cation ratio and sintering temperature on microstructure and electrical properties of NiMnCoO₄-based ceramics Min Sung Park, Hwang Je Mun, Yubin Kang, et al. Ceramist. 2024;27(3):347-358. Article September 30, 2024 PDF
Sintering behavior of alumina by microwave hybrid sintering Khalid Muhammad Waqas, Bin Lee Ceramist. 2024;27(3):359-370. Article September 30, 2024 PDF

Editorial Office: Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
Tel: +82-2-584-0185 Fax: +82-2-586-4582 E-mail: ceramic@kcers.or.kr